ACO Drain - FlowDrain FG200 General Purpose Trench Drain

FlowDrain FG200

	ACO References		Register

	Education		Search:

Home

ACO Drain Home

About Us

Local Sales Support

Tel: 800-543-4764

****JavaScript based drop down DHTML menu generated by NavStudio. (OpenCube Inc. - http://www.opencube.com)****

FG200 is an 8" internal width, general purpose, sloped trench drain system. Grates are secured by 2 bolts per grate and the 9 ft channels allow easy handling and installation.

System Layout

Female closing cap Fits inside shallow/female end of channel. Manufactured from polypropylene with choice of black coated, stainless or galvanized steel end frame. Guides aid cutting to correct height. Seal using appropriate flexible sealant.

Male closing cap Fits outside deep/male end of all channels. Manufactured from polypropylene with choice of black coated, stainless or galvanized steel end rail. Guides aid cutting to correct height. Seal using appropriate flexible sealant.

Outlet cap Fits outside deep/male end of all channels. Manufactured from polypropylene with choice of black coated, stainless or galvanized steel end rail. Guides aid cutting to correct height. Seal using appropriate flexible sealant. Bell end connection to fit 4”, 6” or 8” Schedule 40 pipes.
Note: Can be used as an inlet cap if the female socket is cut from channel. For depth 801-804 channels ACO recommends removal of the bell end to ensure adequate pavement material coverage.
F660 & F880 catch basins One piece fiberglass catch basins with choice of black coated, stainless or galvanized steel frame, lockable steel bar or ductile iron slotted grate and plastic trash bucket. Accessories include 4”, 6” and 8” Schedule 40 pipe adapters and channel collars to connect channel to catch basin.

Nine foot channels
1.0% sloped channels in nine foot lengths and 12 depths which connect to create 108 ft (32.9 meters) continuously sloping trench run. Neutral channels are available in 4 depths and can be used to create non-sloped runs or inserted in sloped runs to increase length. Choice of nine foot black coated, stainless or galvanized steel frame connects to channel body using simple snap-fit studs.

Three foot channels
Neutral channels in 4 depths to supplement the nine foot channels for easier layouts. Choice of three foot black coated, stainless or galvanized steel frame connects to channel body using simple snap-fit studs.

Vertical outlet adapter 4”, 6” or 8” Schedule 40 vertical outlet adapter manufactured from polypropylene. Can be secured to underside of channel using appropriate flexible sealant to provide vertical bell end for easy attachment to 4”, 6”
	or 8” Schedule 40 pipe. Can be used anywhere along channel.

FG200 Parts List

Description	Part	Invert Depth				Overall Depth				Weight
	No.	inches		mm		inches		mm		lbs
		Female	Male	Female	*Male*	Female	Male	Female	Male

F801 Sloped channel - 108” (2.75m) F802 Sloped channel - 108” (2.75m) F803 Sloped channel - 108” (2.75m) F803N Neutral channel - 108” (2.744m) F803N3 Neutral channel - 36” (0.915m) F804 Sloped channel - 108” (2.75m) F805 Sloped channel - 108” (2.75m) F806 Sloped channel - 108” (2.75m) F806N Neutral channel - 108” (2.744m) F806N3 Neutral channel - 36” (0.915m) F807 Sloped channel - 108” (2.75m) F808 Sloped channel - 108” (2.75m) F809 Sloped channel - 108” (2.75m) F809N Neutral channel - 108” (2.744m) F809N3 Neutral channel - 36” (0.915m) F810 Sloped channel - 108” (2.75m) F811 Sloped channel - 108” (2.75m) F812 Sloped channel - 108” (2.75m) F812N Neutral channel - 108” (2.744m) F812N3 Neutral channel - 36” (0.915m)	99006 99013 99021 99048 99034 99055 99062 99071 99095 99084 99109 99116 99123 99145 99132 99156 99162 99175 99192 99186	6.75 7.88 9.00 10.13 10.13 10.13 11.25 12.38 13.50 13.50 13.50 14.63 15.75 16.87 16.87 16.87 18.00 19.13 20.25 20.25	7.88 9.00 10.13 10.13 10.13 11.25 12.38 13.50 13.50 13.50 14.63 15.75 16.87 16.87 16.87 18.00 19.13 20.25 20.25 20.25	172 200 229 257 257 257 286 314 343 343 343 371 400 429 429 429 457 486 514 514	200 229 257 257 257 286 314 343 343 343 371 400 429 429 429 457 486 514 514 514	6.88 8.00 9.13 10.25 10.25 10.25 11.38 12.50 13.63 13.63 13.63 14.75 15.88 17.00 17.00 17.00 18.13 19.25 20.38 20.38	8.00 9.13 10.25 10.25 10.25 11.38 12.50 13.63 13.63 13.63 14.75 15.88 17.00 17.00 17.00 18.13 19.25 20.38 20.38 20.38	175 203 232 260 260 260 289 317 346 346 346 374 403 432 432 432 460 489 517 517	203 232 260 260 260 289 317 346 346 346 374 403 432 432 432 460 489 517 517 517	11.0 12.0 13.0 15.5 5.2 14.1 15.2 16.3 16.3 5.5 17.4 18.5 19.6 19.6 6.5 20.7 21.8 23.0 23.0 7.7

Channel Frames

Black coated steel frame - 108” (2.744m) Black coated steel frame - 36” (0.915m) Galvanized steel frame - 108” (2.744m) Galvanized steel frame - 36” (0.915m) Stainless steel frame - 108” (2.744m)* Stainless steel frame - 36” (0.915m)*	97066 98524 97079 98538 97087 98545	- - - - - -	- - - - - -	- - - - - -	- - - - - -	2.69 2.69 2.69 2.69 2.69 2.69	2.69 2.69 2.69 2.69 2.69 2.69	68 68 68 68 68 68	68 68 68 68 68 68	57.9 19.3 57.9 19.3 57.9 19.3

Catch Basins (see Fiberglass Catch Basins)



Accessories

Closing cap (F) with black end frame Closing cap (F) with galv steel end frame Closing cap (F) with stainless end frame* Closing cap (M) with black end frame Closing cap (M) with galv steel end frame Closing cap (M) with stainless end frame* Outlet cap (M) with black end frame Outlet cap (M) with galv steel end frame Outlet cap (M) with stainless end frame* Vertical outlet adapter - 4”, 6” or 8” outlet	98365 98386 98375 98363 98382 98372 98361 98381 98373 98103	- - - - - - - - - -	- - - - - - - - - -	- - - - - - - - - -	- - - - - - - - - -	20.25 20.25 20.25 20.38 20.38 20.38 20.38 20.38 20.38 -	20.25 20.25 20.25 20.38 20.38 20.38 20.38 20.38 20.38 -	514 514 514 517 517 517 517 517 517 -	514 514 514 517 517 517 517 517 517 -	1.1 1.1 1.1 1.3 1.3 1.3 1.8 1.8 1.8 1.6

Notes:
1. Invert and overall depths are for the channel body & frame assembled
2. Channel weights are for fiberglass body only
3. Closing/Outlet caps can be cut down to suit all channels
4. Add 2” to length of each channel for female joining flange (only applicable at shallowest end of trench run)
5. Frames supplied with plastic snap-fit studs for connecting to fiberglass body
6. (F) = female
7. (M) = male
* Grade 304 stainless steel frames, ACO recommends the use of non-galvanized grates with stainless steel frames to avoid galvanic corrosion.