 Wide choice of grates in various materials and sytles (including ADA compliant) for applications from Load Class A to Load Class E (see Loadings)
 4" internal width trench system - meter (39.37") and half meter (19.69") channel. 'U' shaped bottom improves flow hydraulics.
 Interconnecting end profiles allow easy and effective joining of channels. Appropriate sealand can be used to created a sealed joint.
|
 QuickLok - patented, boltless locking system provides quick fitting and removal of grates. Helps reduce installation / maintenance time and cost (see QuickLok) |
 |
 Sloped (0.6%) channel units -
meter long units provide 98'-5" continuous slope. Neutral units can
be used to extend run lengths.
 |
 |
 Direction arrows
on the sides of the channel indicate flow direction and ensure channels are installed correctly. |
 Bottom drill-outs are included on all channel units to allow vertical evacuation of the system along the run. Schedule 40 drill outs are sized for 4" and 6" pipes.
Note: for 6" pipes, an oval to round adaptor is required (Part No. 95140). |
 |
|
 Integrally cast-in galvanized steel edge rail provides additional strength and protects channel body from damage. (Stainless steel edge rail also available - KS100S).
 Polymer concrete - a durable, yet lightweight material made from polyester resin binder reinforced by mineral aggregates and fillers. It provides up to four times the compressive strength of cement concrete.
(see material properties)
 Profiled side walls - strengthening pillars and frost keys provide channel body strength and mechanical keying to surrounding concrete.
|