Membrane
is
clamped between channel and subframe. Maximum
membrane of 1/2” (12.7mm) can be accommodated - take
care not to block weep holes if using a thick
membrane. Liquids seep through the pavement, collect
on the membrane (not supplied by ACO) and drain into
the channel.
|
|
 |
Clamping device - an inverted ‘U’ shaped
locking bar is fitted to the H80/H100
channel. The modified QuickLok locking bar
is fitted to the Membrane drain subframe.
Two bolts allow connection between the
two bars and hold the membrane tight. |
|
 |
Grates sit directly into the membrane drain
subframe and lock into position with a
removable
QuickLok locking bar mechanism.
 |
Membrane end cap - use top part of
K100S closing cap to close end of subframe.
(Part # 96825).
 End caps and accessories are available
from the
H80/H100 range.
|
|
|
|
Weep holes along each side allow liquids
collecting on the membrane to run into the
channel. Each weep hole opening is 1.18”
(30mm) x 0.15” (4mm).
 Used with H80/H100 channel -
Membrane subframe fits directly on the
H80/H100 channels.
|