‘Anti-shunt’ lugs - recesses in grate fit
around lugs on the edge rail to prevent
longitudinal movement.

Interconnecting end profiles allow easy
and effective joining of channels.
Appropriate sealant can be used to create a
sealed joint.

Sloped (0.6%) channel units - meter
long units provide 98’-5” continuous slope.
Neutral units can be used to extend run
lengths.

12” internal width S300K - meter (39.37”) and half meter (19.69”) channels. ‘U’ shaped bottom improves flow hydraulics.

PowerLok - is a patented, boltless locking system that provides quick fitting and removal of grates. Helps reduce installation / maintenance time and cost (see PowerLok)

Direction arrows cast on side of channel
indicate flow direction and ensure channels
are installed correctly.

Profiled side walls - strengthening pillars and frost keys provide channel body strength and mechanical keying to surrounding concrete.

Bottom drill-outs are included on all channel units to allow vertical evacuation of the system along the run. S100K has Schedule 40 drill-outs for 4” or 6” pipe.
Note: for 6” drill-out, an oval to round adapter will be required. (Part No 95140) S300K has a Schedule 40 drill-out for 6” and 8” pipe.