ACO
SlabDrain
ACO References Register
Education
Home         

On occasion, installation constraints are of greater concern than hydraulics. The most common constraint is lack of depth. To offer solutions where shallow trench drains are required, ACO offers SlabDrain in 3 versions - all neutral. H80 is the shallowest with 3.15” (85mm) overall depth to H100SK with 4.0” (100mm) overall depth. Loading varies for each system, up to heavy duty Class F. All grates are secured to the channel body by either QuickLok (H80, H100, H80K and H100K) or PowerLok (H100SK). SlabDrain products are made to order.

Typical applications

Parking decks

Restricted depth applications
Elevated slabs
Retro-fit
Threshold applications

 
 

SlabDrain - Features


QuickLok on H80/H100 and
H80K/H100K
- patented, boltless locking system provides quick fitting and removal of grates. Helps reduce installation/ maintenance time and cost (see QuickLok)

Direction arrows on the sides of the channel indicate flow direction and ensure channels are installed correctly.

Wide choice of grates in various
materials, styles and slot configurations (including ADA compliant). H80/H100 from Load Class A to Load Class C. H80K/H100K from Load Class A to Load Class E (see Loadings)

 

H80K/H100K - Integrally cast-in
galvanized steel edge rail
provides
additional strength and protects channel body from damage. (Stainless steel edge rail also available).

H100SK Ductile iron grates - heavy duty ductile iron grates in choice of slotted or ADA compliant to Load Class F (see Loadings)

H100SK - Integrally cast-in ductile iron edge rail provides maximum strength and protection for channel body.

 

Profiled side walls - frost keys provide
channel body strength and mechanical
keying to concrete surround.

PowerLok on H100SK - patented,
boltless locking system provides quick
fitting and removal of grates. Helps reduce installation/maintenance time and cost (see PowerLok)

H100SK ‘Anti-shunt’ lugs - recesses in the grate fit around lugs on the edge rail to prevent longitudinal movement of grate.

Bottom drill-outs are included on all channels to allow vertical evacuation of the system at any point in the run. Drill-outs sized for 4” Schedule 40 pipes.

 

Polymer concrete - a durable yet
lightweight material made from polyester resin binder reinforced by mineral aggregates and fillers. It provides up to four times the compressive strength of cement
concrete. Also available in Vinyl ester
polymer concrete for increased chemical resistance - (see Material Properties) .

 

 


4” internal width trench system - meter (39.37”) channels. Flat bottom minimizes construction depth.

SF Sealant Groove - a 5/16” by 5/16”
groove is cast into the female end of every channel. This groove allows for a positive bead of flexible sealant to be inserted at joints.


 

| Home | About Us | Local Sales Support | Contact |

© ACO USA 2007